• myPlasticsindustry
• Suppliers
• By Category
• Conair
• Product Overview

Conair Products

Material Storage

A sampling of our products include...

Welded Silos
SW Series

Available in 10', 11'-11" and 13'-11" diameters
- Maximum usable volume from 5,079 cu ft (143,837 liters) to 9,826 cu ft (278,272 liters)
- Wind load 100 mph
- Steel construction standard, aluminum available

Spiral Silos
SAS Series

- Available in 11'-6" and 14'-8" diameters
- Maximum usable volume from 5,558 cu ft (157,403 liters) to 8,971 cu ft (252,529 liters)
- Wind load 100 mph
- Aluminum construction only

Bolted Silos
SB Series

- Available in 12'-3 11/16", 15'-4 5/8", 18'-5 9/16" diameters
- Maximum usable capacity from 6,653 cu ft (188,412 liters) to 14,727 cu ft (417,069 liters)
- Wind load 100 mph
- Steel construction standard, aluminum available

Surge Bins

Mobile MB Series and In-Plant SB Series

• Available in volumes from 12 cu ft (.34 cu meters) to 514 cu ft (14.5 cu meters)
• Maximum usable capacity from 400 lbs (181 kg) to 18,000 lbs (8164 kg)
• Carbon steel construction standard, stainless steel available
  

Click here for more products and information...

Conveying

A sampling of our products include...

Access™ Loader

- Angled canister equals easy service and cleaning
- All non-ferrous construction standard
- Full featured control

Access™ Receivers

- Angled canister equals easier access and cleaning
- All non-ferrous construction standard
- Integrates easily with existing loading systems

Stainless Steel Material Hoppers Access™ JIT10, JIT20 and JIT40

- Hinged lid design allows easy, efficient hopper cleanout without removal of the loader or receiver
- All non-ferrous material contact points
- Dual sight glasses allow you to check your material level at a glance

Adjustable Purge Valve, Single and Dual APV Models

- New design ensures positive material shut off and successfully evacuates all material from the valve during purging
- All aluminum body and stainless steel valve components
- 360 degree swiveling material outlet allows quick placement of equipment during installation

Pumps
RG Series Pump

- Pumps from 3 to 16 Hp
- Airflow at material pickup range from 41-138 ft3/min
- Airflow at pump inlet range from 56 to 226 ft3/min
- Requires no maintenance

Dustbeaters, B32, IL-64, ILS and ControlWorks

Click here for more products and information...

Drying

A sampling of our products include...

Carousel Plus Dryers

W Models 15, 25, 50, 75 , 100, 150, 200, 300 ,400, 600, 800, 1000, 1600, 2400, 3200,5000

- Temperature range 150° to 375° F
- -40° F dew point
- Precise, adjustable dew point control
- Reduced energy costs

Carousel Plus Dryers
Mobile Drying & Conveying
MDCW Models 15, 25, 50, 75, 100, 150 and 100

- Temperature range 150°to 375° F
- -40° F dew point
- Closed-loop drying and conveying
- No-downtime material changess

- SlimLine
- Drying Hoppers
- Drying Monitor

Click here for more products and information...

Blending

A sampling of our products include...

Gravimetric Batch Blenders
TrueBlend TB45, TB100-4, TB250-4 and TB250-6

- Batch size 1.0 lbs (450 g)
- Maximum throughput 200 lb/hr (91 kg/hr)
- Easy-to-use touch screen control
- Improved accuracy and less down time
- Maximize your efficiency with no leak operation

Gravimetric Batch Blenders
TrueBlend TB250R-4

- Batch size 5.5 lbs (2500 g)
- Maximum throughput 800 lb/hr (363 kg/hr)
- Easy-to-use touch screen control
- Improved accuracy and less down time
- Maximize your efficiency with no leak operation
- Quick access removable material bins

Gravimetric Blenders
TrueBlend TB500-4 and TB500-6

- Batch size 11 lbs (5000 g)
- Maximum throughput 1550 lb/hr (703 kg/hr)
- Easy-to-use touch screen control
- Improved accuracy and less down time
- Maximize your efficiency with no leak operation

TrueBlend Reporting Software

- Reporting and recording software for easy, precise tracking and documentation of your material usage

Click here for more products and information...

Heat Transfer

A sampling of our products include...

Temperature Control Units
Thermolator microTemp Model

- Temperature range 32° to 250° F
- Water process fluid
- Pump range from 0.33 to 0.5 Hp
- Heater range from 3 to 6 kW
- Single zone only
- Direct injection cooling method

Temperature Control Units
Thermolator TW Series

- Temperature range 32° to 250° F
- Water and water/glycol process fluids
- Pump ranges from 0.75 to 7.5 Hp
- Heater ranges from 9 to 48 kW
- Single and dual zones
- Direct injection, closed circuit and isolated circuit cooling methods

Temperature Control Units
Thermolator VTR Series

- Temperature range 32° to 180° F
- Water process fluid
- Pump range from 2 to 7.5 Hp
- Heater range from 9 to 12 kW
- Single zone and dual zones
- Direct injection cooling method
- Positive/negative pressure unit can be used as a temporary fix for leaky molds or bad O-rings

Temperature Control Unit
Thermolator HTR Series

- Temperature range 70° to 500°F
- Oil process fluid
- Pump range from 1 to 3 Hp
- Heater range from 6 to 18 kW
- Single and dual zones
- Heat-only or heat-cool units

Temperature Control Unit
Thermolator TW-CD Series

- Temperature range to 250° F
- Water process fluid
- Pump 0.75 Hp
- Heater range from 9 to 24 kW
- Single and dual zones

Chillers

Click here for more products and information...

Size Reduction

A sampling of our products include...

Beside-the-Machine

CM Series Granulators, NCR Series Granulators, NC69S, NC614S, NC617S Granulators, CF814S Granulator, CLS Series Granulators, CBW and CGW series Granulators

• Chamber size 9.5" x 10" - 14" - 18" (240mm x 220mm-460mm)
• Screenless, multi-tooth rotor
• Meter feed
• Maximum throughput of 40 lbs/hr (18 kg/hr)
• For sprues/runners

Click here for more products and information...

Automation

A sampling of our products include...

Pneumatic and Electric Beam Robots
BE Series

• IMM size up to 850 ton
• Choose from 6 models
• Quick take-out time
• Payloads up to 44 lbs (20 kg)
• Combination pneumatic vertical and strip axis with an electric or servo traverse drive.
• End-of-arm-tooling
• Articulated Robots
• Generation IV Robots

• New low cost three axis servo robot introduced for molding machines under 600 ton allows you to install a servo robot where before it may have been cost prohibitive
• Choose from 3 models
• Standard three axis simultaneous movement
• Automatic lubrication
• Combination cam follower and linear style bearings
• Powerful controls with storage for up to 99 programs
• Off line programming available
• Optional touch screen controls

Downstream Automation

• Call for information
• Application solutions for automated processes
• Insert Molding, degating

Click here for more products and information...

Downstream Extrusion

A sampling of our products include...

• Tube/profile capacity up to 2" diameter
• Tank/table length from 9.5 ft (2,896mm) to 11.5 ft (3,505mm)
• For medical tubing, thin-walled tube (straws), small-diameter flexible hose.

• Air/water seperator standard on all models
• Tube/profile capacity from 2" to 8" diameter
• Vacuum pump from 1.7 hp to 5.1 hp
• Water recirculation pump from 2 hp to 7.5 hp
• Tank/table length from 7 ft (2,133mm) to 23 ft (7,010mm)
• For medical tubing, thin-walled tube (straws), flexible hose, rigid tube pipe, rigid trim profile

• Profile capacity from 1" (25mm) to 22" (559mm) wide
• Vacuum pump from (1) 5 hp to 
  (5) 5 hp
• Water recirculation pump from 2 hp to 10 hp
• 10 to 76 vacuum outlets
• 10 to 70 water outlets
• Tank/table length from 6 ft (1,829mm) to 22 ft (6,706mm)
• For rigid trim/small profile, window/door lineals, plastic lumber/decking

• Tube/profile capacity from 2" to 8" (50mm to 203mm)
• Pumps from 2 hp to 7.5 hp water
• Uniform cooling for tube, pipe and profile

• Tube/profile capacity up to 12 inches (305mm)
• Integral reservoir/spray tank
• Individual control of all spray zones
• Spray system sized for up to 340 GPM
• Increase rates with a process pump and heat exchanger

Click here for more products and information...

System Solutions

A sampling of our products include...

• Conserve material and increase profits with a cost-effective reclaim system for thin film

• Increase profits by reclaiming hard to handle edge trim from sheet or thick film

• Improve productivity and profits with precise energy-efficient control of process temperatures

• Improve productivity, increase shot-to-shot consistency and reduce labor costs

ControlWorks

Click here for more products and information...

Keywords: Blender, Blenders, Chiller, Chillers, Dryer, Dryers, Granulator, Granulators, Loader, Loaders, Material Handling, Materials Handling, Extrusion