About Com-Ten Industries


Com-Ten Industries
6405 49th Street North
Pinellas Park, FL 33781
United States

Product Name:   Torque calibration - CENTORMETER Series

The CENTOR Meter W/H torque screwdrivers calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 3 to 1400 Nm. Each sensor is instrumented with the adaptations necessary to fix it and connect it to the electronic measurement instrument. The calibrator calculates the triggering peak and enables a table of values to be filled in the memory; the table can then be transmitted to a computer via the RS232 output. With the latest version of the CENTOR Meter W/H, you can control the torque on power screwdrivers. This applies to electric, pneumatic and hydraulic screwdrivers, whose speed of rotation can be adjusted up to 3 000 RPM. CENTOR Meter W/H traces a curve, which enables the increase in torque to be displayed instantaneously. Each base unit is fitted with a main sensor and can be fitted with extra sensors, which are recognised automatically

  


This supplier has not activated the Information Request feature.
You may complete the form below to request solutions from other myPlasticsindustry suppliers:

Complete the form below to request solutions from the myPlasticsindustry suppliers who match the category you select:


* indicates required field.
Contact Information:



Product Category
Indicate your desired solution by selecting one of the categories below. Your request will be sent to top myPlasticsindustry suppliers who offer solutions in the category you select:

Available Categories:



Your privacy is of the utmost importance. Information submitted here is not used for any other purpose than to provide you with product information. Read the full Privacy Policy.